Cutok Dc330 Driver Windows 10

The plotter interprets design data correctly.

Once installed, the cutter will be assigned a specific virtual COM port. Your cutting cutting software must match this exact port. In , expand the Ports (COM & LPT) section. Note the number next to your device (e.g., COM3 or COM4 ). Open your cutting design software (like Cutmate or Artcut).

The Cutok DC330 most frequently uses the . Cutok Dc330 Driver Windows 10

Change the COM port number to a lower value (e.g., COM1, COM2, or COM3). C. Reinstalling the USB-SERIAL CH340 Driver

Cutok DC330 is a desktop mini vinyl cutter and plotter designed for small graphics, labels, and DIY crafts. While it was originally developed for older versions of Windows, you can still operate it on Windows 10 using specific drivers and third-party software plugins. Drivers & Compatibility Operating Systems The plotter interprets design data correctly

Compatible with professional vinyl cutting software such as Easy Cut Studio and XFCut , which include built-in drivers for this model. Installation Guide for Windows 10 Cutok DC330 Vinyl Cutter Setup instructions - SignTools 4

If you do not have an automated installer (.exe), follow these manual steps: In , expand the Ports (COM & LPT) section

The CUTOK DC330 also works perfectly with other vinyl cutting software, such as:

If your software says "Cannot open COM port," it may be occupied by another device. In , right-click the USB-SERIAL port. Select Properties > Port Settings > Advanced .

Do not use generic "driver updater" programs that ask for payment. The driver is freely available. Visit the official Cutok Support page.