Once you have these files, installing them is a straightforward process:
) of the HX711 model. This pot acts as your physical weight scale.
The 24-bit bit-shifting loop can sometimes strain the real-time simulation engine. If CPU utilization hits 100%, lower the clock frequency property of your microcontroller inside Proteus (e.g., lower from 16MHz to 8MHz) or increase the delay interval inside your script loop.
Look at the console area at the bottom, find the path ending in .ino.hex , and copy it. 5. Running and Troubleshooting the Simulation Loading the Hex File Double-click the component in Proteus. hx711 proteus library
I can provide the specific schematic diagram and custom code you need.
Are you planning to add any or wireless modules to this project? Share public link
Extract the downloaded files and copy both the .IDX and .LIB files. Paste them into your Proteus library directory. Depending on your version, the default paths are usually: Once you have these files, installing them is
To interact with the HX711 model, use the standard HX711 library within the Arduino IDE. Arduino Sketch
The potentiometer value is stationary, or the clock timing parameters are out of sync with the virtual microcontroller frequency.
const int LOADCELL_DOUT_PIN = 2; const int LOADCELL_SCK_PIN = 3; HX711 scale; If CPU utilization hits 100%, lower the clock
: You did not place the library files in the correct folder, or you forgot to restart Proteus.
Double-click the microcontroller in Proteus, paste the .hex file path into the property field, and click OK . Running and Troubleshooting the Simulation