| Model | 10/100/1000 BASE-T Ports | SFP (Gigabit) Uplink Ports | PoE+ Support | Default AC Power | | :--- | :--- | :--- | :--- | :--- | | | 24 | 2 | No | Internal | | ERS 2460-24P | 24 | 2 | Yes (802.3at/af) | Internal (450W) | | ERS 2460-48T | 48 | 2 | No | Internal | | ERS 2460-48P | 48 | 2 | Yes (802.3at/af) | Internal (750W) |
operates primarily in the low-frequency spectrum, providing critical underlying coverage layers for 4G LTE and 5G New Radio (NR) networks. Specifications & Details 24B8 (900 MHz), 24B20 (800 MHz), 24B28B (700 MHz) MIMO Configuration 2x2T / 4R per band (multi-antenna support) Maximum Output Power Up to 80W total (typically configured as 4x20W) Ingress Protection IP65 certified for environmental resilience Optical Interfaces 2x 10G FullAXS SFP ports for CPRI/eCPRI transport RF Connectors 4x 4.3-10 female connectors Cooling System Passive cooling / Integrated passive thermal management Core Features and Capabilities 1. Multi-Standard & Multi-Band Flexibility
Select modular uplink variants support 400GbE (QSFP-DD) for direct aggregation core connectivity. ericsson ers 2460 datasheet
When examining the , it is important to first understand the legacy of the hardware. The Ericsson Redback SmartEdge series (which includes the ERS 2460) was a heavyweight in the early-to-mid 2000s ISP and carrier market. Eventually acquired by Ericsson and later transitioning into the Ericsson Router 6000 series , the ERS 2460 was designed as a high-capacity Broadband Remote Access Server (BRAS) and IP edge router.
The bottom connectivity panel of the Ericsson ERS 2460 provides secure, weatherized access points for fiber, power, RF, and control lines: | Model | 10/100/1000 BASE-T Ports | SFP
Equipped with high-speed optical SFP ports supporting Common Public Radio Interface (CPRI) and enhanced CPRI (eCPRI). This guarantees seamless compatibility with Ericsson Fronthaul and Baseband units (e.g., Baseband 6630 or 6648).
Standard 19-inch rack width, optimized depth for standard telecom enclosures. When examining the , it is important to
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.
Minimizing wind load and tower lease costs by replacing multiple single-band radios with one multi-band unit.
The article will have the following sections: