Connects in series with your magnetic contactor coil or heating load.
If you are searching for the , focus your search on the specific brand printed on the faceplate. Once found, prioritize the Parameter Lock and Sensor Input sections to get your device running correctly.
0 = Reverse action (Heating mode); 1 = Direct action (Cooling mode). High / Low Alarm
To access the full configuration menu for sensor type, control mode, etc.: xmtg2000 temperature controller manual pdf top
| Parameter | Range / Details | |-----------|----------------| | | ±0.5% of full scale ±1 digit | | Sampling Rate | 2–4 times per second (varies by model revision) | | Output Types | Relay (3A/250V), SSR (12V/30mA), 4-20mA linear, or Triac | | Input Types | K, J, T, E, N, S, R, B, Pt100, Cu50, 0-10V, 0-20mA, 4-20mA | | Control Modes | ON/OFF, P, PI, PD, PID | | Alarm Outputs | Up to 2 independent alarms (AL1, AL2) | | Power Supply | 100-240VAC (50/60Hz) or 24VAC/VDC for low-voltage versions |
Before diving into the setup, here’s what’s under the hood of the Temperature Range: 0°C to 1000°C (standard). Input Support:
This article serves as a comprehensive guide to understanding the , providing insights into installation, wiring, and parameter settings. 1. Overview of the XMTG-2000 Series Connects in series with your magnetic contactor coil
) function to allow the PID to calculate proper parameters for your system.
Relay contact, SSR drive (12V DC), or 4-20mA current loop. Panel Layout
Disclaimer: Always prioritize the wiring diagram printed on your specific unit, as manufacturers may make minor design changes. 0 = Reverse action (Heating mode); 1 =
When you are working with industrial temperature control systems, precision is non-negotiable. The has become a staple in labs, factories, and HVAC systems due to its reliability and dual-display functionality. However, to unlock its full potential—from setting PID parameters to correcting sensor drift—you need the official documentation.
Relay contact, SSR (Solid State Relay) drive, or current output (4-20mA). Power Supply: Standard 85-264V AC, 50/60Hz. Wiring Diagram Overview
Terminals for the internal relay (for contactors) or SSR drive (voltage pulse). Parameter Settings: Pressing and holding the key usually enters the configuration menu. P, I, and D values:
If you can tell me the exact brand name on your unit (e.g., Elitech, Omron style, etc.) and what you're trying to control (e.g., a furnace, a kiln, a plastic sealer), I can give you more specific, tailored advice. Share public link
There are several ways to obtain the PDF manual for your device:
