Reboot the server and select the virtual CD-ROM as the primary boot device. Step-by-Step Installation Process Boot the server using your chosen installation media.
: After reboot, the ESXi host will start. Press F2 at the Direct Console User Interface (DCUI) to configure:
: Choose the local disk where ESXi will be installed. Options are limited to local hard drives (including USB drives if boot-from-USB deployment is intended). The installer will detect and display available disks.
Modern network cards might not work with ESXi 5.5. You may need to inject drivers into the ISO using ESXi-Customizer-PS . vmware esxi 5.5 iso download
Follow the on-screen prompts to select the target drive and set the root password. 3. Post-Installation Configuration
Standard ESXi installers lack drivers for specific server hardware. Server manufacturers host customized ESXi 5.5 ISOs containing these critical storage and network drivers.
Q: Is VMware ESXi 5.5 still supported? A: Yes, VMware ESXi 5.5 is still supported, but it's recommended to upgrade to a newer version for better security and features. Reboot the server and select the virtual CD-ROM
Free ESXi 6.5 - How to Download and get License Keys - virten.net
Press F11 to accept and continue.
: Customized images can occasionally be found by navigating through the HPE Support Center . Installation & Deployment Steps Press F2 at the Direct Console User Interface
By following this guide, you can successfully download and install VMware ESXi 5.5. However, given the significant security and stability risks of running unsupported software, it's wise to use this version only for legacy applications, offline labs, or as a temporary step in a planned upgrade, while actively exploring migration to a newer, supported platform.
Since the acquisition of VMware by Broadcom, the portal structure has changed. To access legacy binaries, you typically need an active support contract or a registered account.
At least one Gigabit or 10 Gigabit Ethernet controller. Note that ESXi 5.5 does not natively support many modern onboard consumer Realtek or Intel NICs.
After the system reboots, the Direct Console User Interface (DCUI) gray and yellow screen will display.